Reasons Your Hot Water Heater Isn't Working

Blog Article

What're your opinions regarding How to Troubleshoot and Repair an Electric Water Heater?

Lots of contemporary houses utilize an electric water heater for their heating system, as a result of its comfort as well as simplicity of use. However, just like any other electric devices, issues may emerge with its use, suddenly. It can be truly aggravating to wake up to a cool shower as opposed to a hot one or having your bath with water that isn't warm adequate and even too hot. Whatever the instance might be, water heater problems can be fairly stressful. Thankfully, we've made a checklist of feasible solutions to your hot water heater problems. There are a number of factors that can trigger a lot of these troubles, maybe an issue with the power supply, the electric burner, or the thermostat. Before doing anything, guarantee you shut off the main power supply for safety and security. Whatever the issue is, getting it fixed need to not pose way too much of a problem if you follow these actions:

Check Your Power Supply:

As standard as this might seem, it is really required. Without ample power, your hot water heater will not operate. So the first thing to do when your water all of a sudden retires is to verify that it isn't a power trouble. Inspect if the fuse is burnt out or the circuit breaker tripped. If the breaker is the issue, just turn it on and off again. Change any damaged or worn-out fuse. Check the appliance with power after these modifications to see if it's now functioning.

Examine the Heating Element in the Hot Water Heater:

If it's not a power issue, after that try looking into your heating element if it is still functioning. Test each of your burner to ensure the issue isn't with any one of them. If any of them is malfunctioning, replace that part and afterwards check whether the hot water is back on.

Examine Your Thermostat:

If your water heater still isn't functioning or the water appearing isn't hot sufficient, you might need to inspect the temperature level settings on your top thermostat. Ensure the circuit breaker is turned off before doing anything. Open the accessibility panel and press the red button for temperature level reset above the thermostat. This ought to aid heat the water. Turn the breaker back on as well as examine if the issue has actually been dealt with.

Call An Expert:

If after replacing all defective components and resetting your temperature level, the hot water heater still isn't working, you might need to get in touch with a specialist plumber for a professional viewpoint. The trouble with your heater could be that the cold and hot faucets have been changed or it might be undersized for the amount of hot water required in your house. Whatever the case may be, a specialist plumber would assist fix the trouble.

Conclusion

Hot water heater troubles are not always major. Much of them result from small issues like a blown fuse or worn-out heating element. Changing the defective components should do the trick. Nevertheless, if you are still not able to solve the trouble, give a call to your nearby plumber to find to get it repaired.

Common Reasons Why Your Hot Water Heater Isn’t Working

Water Gets Too Hot

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

Water Doesn’t Get Hot

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

Leaking Water Heater

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

Noisy Water Heater

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

Pilot Light Keeps Going Out

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

Water Smells Bad

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

Water Looks Brown Or Rusted

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/

As a devoted person who reads on Hot Water Heater Repair, I was thinking sharing that topic was mandatory. Feel free to take the time to distribute this blog if you liked it. Thanks a lot for taking the time to read it.

REASONS YOUR HOT WATER HEATER ISN'T WORKING

Reasons Your Hot Water Heater Isn't Working